Reptile Enclosure, 46 x 23 x 23-Inch PVC Habitat with Hinged Acrylic Front and Choice of Top Panel

Give your reptile a practical 46 x 23 x 23-inch home that can be configured around your preferred heat and lighting arrangement. The 12mm PVC enclosure has a hardened shell, a hinged acrylic front, ventilation, and cord slots for an organized habitat setup.

Choose black or white, then select a solid top for internal heat and lighting, one or two 12 x 12-inch stainless mesh inserts for external heating, or a galvanized mesh top bordered by a 3.5-inch PVC perimeter.

Key Features

• Solid and mesh top choices let you position heating and lighting inside or above the habitat according to your animal’s setup.
• Rear vents and center-height side vents add airflow through the enclosure, supporting thoughtful habitat management.
• Built-in cord slots provide a dedicated route for heat and lighting cables, keeping the habitat wiring easier to organize.
• The hardened shell on the 12mm PVC construction supplies strength for long-term use in your reptile’s home.
• The hinged acrylic front opens for routine habitat access, while the included hinges and latches provide the required door hardware.
• An included center support reinforces the acrylic front when enclosures are stacked; it can be left off when nothing is stacked above.

Specifications

• Overall dimensions: 46 x 23 x 23 inches.
• Construction: 12mm PVC with a hardened shell.
• Front: Hinged, single-layer acrylic.
• Available colors: Black and white.
• Solid-top configuration: Solid panel for internal lighting and heat.
• Single-insert configuration: One 12 x 12-inch stainless mesh insert.
• Dual-insert configuration: Two 12 x 12-inch stainless mesh inserts.
• Mesh-top configuration: Galvanized mesh with a 3.5-inch PVC perimeter.
• Ventilation: Rear vents and center-height side vents.
• Wiring access: Cord slots are included.
• Included items: Hinges, latches, hardware, and instructions.
• Stacking support: A removable center support is included.
• A light hood is recommended for higher-humidity species when using a full mesh top.
• A light hood is required for stackability when exterior lighting is used over mesh.
• Assembly tools: #2 Robertson screwdriver or drill bit, 7mm socket, and 19mm or 3/4-inch socket; pliers may replace the 19mm socket fitting tool requirement specified for assembly of the hinge and latch hardware installation step only as stated in the provided

Choose the color and top configuration that suit your reptile’s heating, lighting, and humidity routine. If you plan to stack the enclosure or house a higher-humidity species under a full mesh top, add the appropriate light hood as directed.